Essential Safety Tips and Information All Inverter Pure Sine Owners Must Know

When it comes to mobile power solutions, an inverter (pure sine) is perhaps the best and the most viable option. With this device, you don’t have to purchase AA or rechargeable batteries for your devices and gadgets every time you go on camping. You can use a wide range of common household appliances and power tools even if you’re off the power grid. With an inverter, you can transform your car into a mobile home or office without having the need to invest in a bulky and noisy power generator.

But just like any electronic device, the power inverter is not indestructible. If you don’t use it properly, there’s a likelihood that it will get damaged easily. As such, if you want your inverter to last longer and at the same time, ensure your safety, you must know to use it and take care of it the right way.

Inverter safety tips and general information

1. Always use an inverter with bigger capacity. To ensure continued use, always select 24v or 12v pure sine wave inverters that are rated 10% to 20% higher than the total wattage of the tools or appliances you’d like to connect with your inverter. When shopping for this device, you should take into account the surge wattage or the start-up power required by the appliances to ensure that you’re purchasing the right inverter.

2. Place the invert in a cool, dry place. Make sure to place the inverter in a well-ventilated area, especially when the device is in use. You must never install it inside the engine compartment or place it on or near heating vents, radiators, and other sources of heat. Placing it under direct sunlight or near flammable materials is a big no-no, too. Like the inverter, the cables and wires should stay cool, dry, and untangled.

3. Do not expose the inverter to moisture. To prevent accidents, you must never use a 12v or 24v pure sine wave inverter, if you, the inverter, the power source, or the device that is being powered is wet. Otherwise, it can cause electric shock, serious injury, or even death. Always make sure that the inverter and all the necessary components are dry before using them.

4. Use the right wiring harness. If you’re going to plug the inverter into your cigarette lighter, see to it that you use the correct wiring harness. It is important that your vehicle’s wiring harness can handle the current or it could cause damage to the inverter, the device to be used, and the vehicle. For safer use, it would be better to simply directly connect the inverter to your car’s battery.

Make sure that you follow the tips discussed above to ensure not only the safety of your car, inverter, and appliances, but yours, as well. Visit us at Elinz Electronics to find quality 2000w inverters.