When it comes
to mobile power solutions, an inverter (pure sine) is perhaps the best and the
most viable option. With this device, you don’t have to purchase AA or
rechargeable batteries for your devices and gadgets every time you go on
camping. You can use a wide range of common household appliances and power
tools even if you’re off the power grid. With an inverter, you can transform
your car into a mobile home or office without having the need to invest in a
bulky and noisy power generator.
But just like any electronic device, the power inverter is not indestructible. If you don’t use it properly, there’s a likelihood that it will get damaged easily. As such, if you want your inverter to last longer and at the same time, ensure your safety, you must know to use it and take care of it the right way.
But just like any electronic device, the power inverter is not indestructible. If you don’t use it properly, there’s a likelihood that it will get damaged easily. As such, if you want your inverter to last longer and at the same time, ensure your safety, you must know to use it and take care of it the right way.
Inverter safety tips and general information
1. Always use
an inverter with bigger capacity. To ensure continued use, always select 24v or
12v pure sine wave inverters that
are rated 10% to 20% higher than the total wattage of the tools or appliances
you’d like to connect with your inverter. When shopping for this device, you
should take into account the surge wattage or the start-up power required by
the appliances to ensure that you’re purchasing the right inverter.
2. Place the
invert in a cool, dry place. Make sure to place the inverter in a
well-ventilated area, especially when the device is in use. You must never
install it inside the engine compartment or place it on or near heating vents,
radiators, and other sources of heat. Placing it under direct sunlight or near
flammable materials is a big no-no, too. Like the inverter, the cables and
wires should stay cool, dry, and untangled.
3. Do not
expose the inverter to moisture. To prevent accidents, you must never use a 12v
or 24v pure sine wave inverter, if
you, the inverter, the power source, or the device that is being powered is
wet. Otherwise, it can cause electric shock, serious injury, or even death.
Always make sure that the inverter and all the necessary components are dry
before using them.
4. Use the
right wiring harness. If you’re going to plug the inverter into your cigarette
lighter, see to it that you use the correct wiring harness. It is important
that your vehicle’s wiring harness can handle the current or it could cause
damage to the inverter, the device to be used, and the vehicle. For safer use,
it would be better to simply directly connect the inverter to your car’s
battery.
Make sure
that you follow the tips discussed above to ensure not only the safety of your
car, inverter, and appliances, but yours, as well. Visit us at Elinz
Electronics to find quality 2000w inverters.